Dual Band

FW-600
LAA

THE FW-600 B48/46 DUAL BAND ARCHITECTURE

Up to 6 carriers per unit in DL and 4 carriers in UL across B48 and B46
Each FW-600 LAA unit has 2 sectors. Each sector contains 3 carrier cells (6 carrier cells in total).
Carriers can be split in multiple configurations across B48 and B46. For example: 2 carriers in B48 + 4 carriers in B46 or 4 carriers in B48 + 2 carriers in B46
Carrier aggregation (up to 3CC*) is supported in both contiguous and non-contiguous fashion covering entire band without IBW window restrictions.

*Roadmap Item

eNodeB HIGHLIGHTS

Delivers close to 1 Gbps Aggregate Throughput per eNodeB
CBRS Category B certified
Supports multiple TDD profiles, including TDD Configs 1-7 & 2-7
Supports Uplink* and Downlink Carrier Aggregation
Supports modulations of 256 QAM* in Downlink and 64 QAM in Uplink
When paired with BLiNQ’s dual band multi-beam antenna, provides system capacity of 2.65 Gbps

RF Connectivity for three FW6-B48-46-NA with one FW6-MBA12F-HJ5AA

FW6-B48-46-NA

RADIO & MBA SYSTEM SPECIFICATIONS
Frequency Band	3.55 - 3.70 GHz (LTE Band 48 - CBRS) 5.15 - 5.925 GHz (LTE Band 46)
Transmit Power (Max.)	B48: 33 dBm/antenna port + 3dB (MIMO) B46: 23 dBm/antenna port + 3dB (MIMO)
EIRP (Max.) (when paired with FW6-MBA12F-HJ5AA antenna)	B48: 50 dBm/antenna port + 3dB (MIMO) B46: 45 dBm/antenna port + 3dB (MIMO)
Channel Bandwidths	10, 20 MHz
MIMO	12TX x 12RX per FW-600 unit
LTE Compliance	3GPP Release 10 (SW upgrade to Release 13)

PERFORMANCE AND ATTRIBUTES	1 x FW6-B48-46-NA	3 x FW6-B48-46-NA with FW6-MBA12F-HJ5AA antenna
Number of UEs Supported	Up to 192 UEs per base unit	Up to 576 UEs (3 base units)
Carrier Aggregation	Supports contiguous and non-contiguous 1CC, 2CC and 3CC*, covering full CBRS band (150 MHz)
Throughput DL TDD Config 2-7 (default)	6 Carriers x 140 Mbps* (Total DL up to 840 Mbps)	18 Carriers x 140 Mbps* (Total DL up to 2.5 Gbps)
Throughput UL TDD Config 2-7 (default)	4 Carriers x 11 Mbps (Total UL up to 44 Mbps)	12 Carriers x 11 Mbps (Total UL up to 132 Mbps)
Operating Mode	TD-LTE
Power Consumption	350 W maximum	1050 W maximum
Power	48 VDC
Connectivity	1 x Copper 1000BaseT 1 x SFP 1 x PPS TNC Connector 1 x AISG/RET Control Port 4 x 2.2-5 RF Ports 8 x NEX10 RF Ports	3 x Copper 1000BaseT 3 x SFP 3 x PPS TNC Connectors 3 x AISG/RET Control Ports 12 x 2.2-5 RF Ports 24 x NEX10 RF Ports
Synchronization	Integral GPS antenna (GPS, GLONASS, BeiDou)

*Roadmap Item

OPERATIONS, ADMINISTRATION AND MAINTENANCE (OAM)
Configuration	WebUI, CLI and EMS
EMS Integration	RESTCONF
OAM Protocols	RESTCONF, HTTPS, SSH, SNMPv2c
Citizens Broadband Radio Service (CBRS)	CBSD Category B

FW6-MBA12F-HJ5AA (Antenna) Specifications

ELECTRICAL	12 x Ports which cover the full range from 3400-3800 MHz	12 x Ports which cover the full range from 5150 - 5300 MHz	12 x Ports which cover the full range from 5700 - 5925 MHz
Frequency Range	3400-3800 MHz	5150-5300 MHz	5700-5925 MHz
Gain Peak	24.6 dBi	21.9 dBi	22.1 dBi
Gain Average	23.9 dBi	21.3 dBi	21.5 dBi
Azimuth Beamwidth (-3 dB)	9.0°	17.0°	16.9°
Azimuth Beam Crossover	-10.5 dB	-10.5 dB	-10.5 dB
Elevation Beamwidth (-3 dB)	5.4°	5.6°	5.3°
Electrical Downtilt	4°	4°	4°
Elevation Sidelobes (1st Upper)	< -18 dB	< -18 dB	< -18 dB
Front-To-Back Ratio @ 180°	> 30 dB	> 30 dB	> 30 dB
Cross-Polar Discrimination at Peak	> 18 dB	> 18 dB	> 18 dB
Cross-Polar Isolation	> 25 dB	> 25 dB	> 25 dB
Co-Pol Isolation adjacent beams (worse case)	> 20 dB	> 18 dB	> 18 dB
Co-Pol Isolation non-adjacent beams (worse case)	> 15 dB	> 14 dB	> 14 dB
Cross-Polar Port-To-Port Isolation	> 25 dB	> 25 dB	> 25 dB
Voltage Standing Wave Ratio (VSWR)	<1.5:1	<1.5:1	<1.5:1
Passive Intermodulation (2x20W)	≤-140 dBc	NA	NA
Input Power per Port (CW)	100 watts	50 watts	50 watts
Polarization	+/- 45°	+/- 45°	+/- 45°
Input Impedance	50 Ohms	50 Ohms	50 Ohms
Lightning Protection	DC Gnd	DC Gnd	DC Gnd