Dual Band
FW-133-3550
Datasheet
Key Features
- Supports TDD-LTE Mode Band 42/43/48 & 46 *
- Supports 3GPP Release 12
- Supports up to UE LTE Category 12/13/15 PHY Rate **
- Supports 4×4 MIMO with 40 MHz CA
- Supports DL 256QAM with DL 2×2 MIMO only
- Supports UL 2Tx (CDD / UL_MIMO/ UL_CA)
- Physical 2Tx & 4Rx in RF Front End
- GPS for location (optional HW & SW ; not in default package )
- Supports 1.8V and 3V SIM and USIM Card for LTE Mode
- Supports Dynamic Host Configuration Protocol
- Built-in web server for web-based configuration
- Password protected access and configuration
- Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab (10/100/1000 Mbps )
- Support Power over Ethernet of Outdoor WAN port {802.3 af}
- Supports VPN pass-through
- IP65 Environmental Proof
* B46 supports UNII-1 & 3
** TDD Cat 12/13 with 4×4 + 40MHz carrier aggregation peak throughput is around 440Mbps for Downlink @ TDD Config 2 SSF 7 & UL CA + 64QAM is around 30Mbps for Uplink
** TDD Cat 15 with2x2 + 80MHz carrier aggregation +256QAM peak throughput is 500 Mbps+ for Downlink @ TDD Config 2 SSF 7 & UL CA + 64QAM is around 30Mbps for Uplink
Specifications
FWC-133-3550
| MECHANICAL, ENVIRONMENTAL & REGULATORY | ||
|---|---|---|
|
Dimension (L x W x H) |
13.4” x 13.4” x 2.2’’ (340 mm x 340 mm x 55 mm) |
|
|
Weight |
4.4 lbs (2 kg) |
|
|
PoE |
802.3at |
|
|
Power |
Input: Universal range 100~240V AC Output: 56V DC |
|
|
Reset/Reboot Buron |
Tactile Switch (hidden for repair only) |
|
|
Operating Humidity |
5% to 95% |
|
|
Storage Humidity |
5% to 95% |
|
|
Operational Temperature |
-40°F to 131°F (-40°C to 55°C) |
|
|
Storage Temperature |
-40°F to 158°F (-40°C to 70°C) |
|
|
Radio - CBRS |
FCC Part 96 |
|
|
Radio - UNII |
FCC Part 15E |
|
|
CBSD Category |
Category B |
|
| NETWORKING & OAM | ||
|---|---|---|
|
LTE BB ASIC |
GDM7243A (GCT Semiconductor) |
|
|
LTE RF ASIC |
GRF7243A+ (GCT Semiconductor) |
|
|
Ethernet LAN Ports |
1 x RJ-45 Port 10/100/1000 Auto-Sensing, Auto-MDX |
|
|
LED Indicators |
Signal Strength / LAN / SIM |
|
|
SIM Function |
1.8V, 3V SIM and USIM card |
|
|
PIN/PUK Code |
Yes (Ready with chipset) |
|
|
Stack |
IPv4, IPv6, IPv4/v6 dual stack |
|
|
NAT/Dynamic NAT |
Yes |
|
|
Router Mode |
Yes |
|
|
Bridge Mode |
Yes (Available per request) |
|
|
Tunnel Mode |
GRE, L2TP, IPsec, PPTP (Available per request) |
|
|
DCHP Server in LAN |
Yes (253 clients max. in NAT Mode) |
|
|
DNS Relay |
Yes (in NAT Mode) |
|
|
DDNS Client |
Yes (in NAT Mode) |
|
|
VPN Pass-Through – IPSec/PPTP/ L2TP |
Yes (in NAT Mode) |
|
|
UPNP |
Yes |
|
|
HTTP(s) Server |
Yes |
|
|
ALG Support (FTP/SIP/...) |
Yes |
|
|
Networking Debug/TesGng |
IPerf, Ping, Traceroute |
|
| RADIO SPECIFICATION | ||
|---|---|---|
|
Frequency Band |
TDD LTE Bands 42, 43, 48, 46 |
|
|
Peak Gain @ 3.5 GHz |
12 dBi |
|
|
Peak Gain @ 5 GHz |
16 dBi |
|
|
Peak Throughput – Cat 12/13 (Config 2-7) |
DL 440 Mbps; UL 30 Mbps |
|
|
Peak Throughput – Cat 15 (Config 2-7) |
DL 500 Mbps; UL 30 Mbps |
|
|
DL Carrier Aggregation Bandwidth |
80 MHz max. (20 MHz + 20 MHz non-contiguous up to 40 MHz) (40 MHz (contiguous) + 40 MHz (contiguous) up to 80 MHz) |
|
|
UL Carrier Aggregation Bandwidth |
40 MHz max. with 2CC |
|
|
Transmit Power
|
23 dBm (@ 3.5GHz) 20 dBM (@ 5 GHz) |
|
|
Tx Power Dynamic Range |
63 dB |
|
|
Receiver Sensitivity (at 20 MHz) |
-96 dBm |
|
|
Channel Bandwidth/Carrier |
5, 10, 15, 20 MHz |
|
|
MIMO |
DL MIMO 2x2 / 4x4 / 8x4 UL 1x2 (with diversity); UL 1x2 CA; UL 2x2 |
|
|
LTE Compliance |
3GPP Release 12 |
|
| DEVICE MANAGEMENT & SECURITY | ||
|---|---|---|
|
WEB |
Yes |
|
|
SNMP |
Ready for IoT |
|
|
TR-069 |
Ready for IoT |
|
|
TR-0143 |
Ready for IoT |
|
|
OMA-DM |
N/A |
|
|
FOTA Upgrade |
Yes |
|
|
System Log/Diagnostic |
Yes (Chipset embedded tool) |
|
|
Username/Password Configuration |
Yes |
|
|
L2/L3 Firewall |
Basic Firewall/Port Forwarding/Port Trigger/DMZ/Remote WAN Ping/Remote Web Access Control |
|
|
Time Zone Configuration |
Yes |
|
|
Firmware Verification |
Yes (Use digital signal to verify installed software) |
|
© All rights reserved BLiNQ Networks