FW-600
Band 42/43/48
Specifications
[save_as_pdf_pdfcrowd output_name=’FW-600_Band_42_43_48_Specs_BLiNQNetworks.pdf’]
Specifications
FW6-B48-00-NA / FW6-B42-43-EU
| RADIO SPECIFICATION | FW6-B48-00-NA | FW6-B42-43-EU |
|---|---|---|
|
Frequency Band |
TDD LTE Band 48 |
TDD LTE Bands 42, 43 |
|
Max. Transmit Power |
33 dBm/port (+ 3 dBm MIMO) |
36 dBm/port (+3 dBm MIMO) |
|
Channel Bandwidth |
10, 20 MHz |
|
|
MIMO |
6Tx x 6Rx (several possible MIMO configurations) |
|
|
LTE Compliance |
3GPP Release 10 (SW upgrade to Release 13) |
|
| MECHANICAL | ||
|---|---|---|
|
Dimensions (LxWxD) Base Unit |
19.4” x 12” x 8.4” (492 mm x 304 mm x 160 mm) |
|
|
Survival Wind Speed |
Up to 125 mph (200 kph) |
|
|
Weight |
55.1 lbs (25.0 kg) |
|
|
Bracket Weight |
33.1 lbs (15 kg) – Supports up to 3 x FW-600 units |
|
|
Operational Temperature |
-40 °F to 140 °F (-40 °C to 60 °C) |
|
| PERFORMANCE & ATTRIBUTES | FW6-B48-00-NA | FW6-B42-43-EU |
|---|---|---|
|
Number of UEs Supported |
Up to 288 UEs per Base Unit |
|
|
Throughput DL TDD Config 2-7 |
110 Mbps (140 Mbps*) per Carrier
330 Mbps (420 Mbps*) per Base Unit - 3 x Carriers |
|
|
Throughput UL TDD Config 2-7 |
11 Mbps per Carrier
33 Mbps per Base Unit - 3 x Carriers |
|
|
Operating Mode |
TD-LTE supports all standard frame configurations |
|
|
Power Consumption |
180 W |
480 W |
|
Power |
48V DC |
|
|
Connectivity |
1 x Copper 1000BaseT 1 x SFP 1 x PPS TNC Connector 6 x 2.2-5 RF Connectors |
|
|
Synchronization |
Integral GPS receiver (GPS GLONASS BeiDou) |
|
|
Embedded EPC |
Software Option |
|
*Roadmap Item
| OA&M | ||
|---|---|---|
|
Configuration |
WebUI, CLI and EMS |
|
|
EMS Integration |
RESTCONF |
|
|
OAM Protocols |
RESTCONF, HTTPS, SSH, SNMPv2c |
|
FW6-MBA3F-H3AA ANTENNA SPECIFICATIONS
| ELECTRICAL | ||
|---|---|---|
|
Ports |
6 x High Band Ports for 3400-3800 MHz |
|
|
Frequency Range |
3400-3800 MHz |
|
|
Gain |
22.3 dBi |
|
|
Azimuth Beamwidth (-3 dB) |
17.6° |
|
|
Azimuth Beam Crossover |
11.1 dB |
|
|
Elevation Beamwidth (-3 dB) |
5.4° |
|
|
Electrical Downtilt |
4° |
|
|
Elevation Sidelobes (1st Upper) |
< -22 dB |
|
|
Front-to-Back Ratio @180° |
> 35 dB |
|
|
Cross-Polar discrimination (at Peak) |
> 18 dB |
|
|
Cross-Polar Port-to-Port Isolation |
> 25 dB |
|
|
Interbeam Co-Pol Isolation (Adjacent Beams) |
> 25 dB |
|
|
Interbeam Co-Pol Isolation (Non-Adjacent Beams) (Worse Case) |
> 15 dB |
|
|
Voltage Standing Wave Ratio (VSWR) |
< 1.5:1 |
|
|
Passive Intermodulation (2x20W) |
≤ -153 dBc |
|
|
Input Power Continuous Wave (CW) |
200 watts |
|
|
Polarization |
Dual Pol 45° |
|
|
Input Impedance |
50 ohms |
|
|
Lightning Protection |
DC Ground |
|
| MECHANICAL | ||
|---|---|---|
|
Dimensions (LxWxD) |
35.6” x 12.9” x 6.3” (904 mm x 328 mm x 160 mm) |
|
|
Survival Wind Speed |
Up to 150 mph (240 km/hr) |
|
|
Front Wind Load |
99 lbs (440 N) @ 100 mph (161 kph) |
|
|
Side Wind Load |
53 lbs (237 N) @ 100 mph (161 kph) |
|
|
Equivalent Flat Plate Area |
3.9 ft² (0.4 m²) |
|
|
Weight** |
22.5 lbs (10.2 kg) |
|
|
Connector |
6 x 4.3-10 female |
|
|
Mounting Pole |
2" to 5" (5 cm to 12 cm) |
|
** Weight excludes mounting
[save_as_pdf_pdfcrowd output_name=’FW-600_Band_42_43_48_Specs_BLiNQNetworks.pdf’]
© All rights reserved BLiNQ Networks