Dual Band
Cognitive radio technology that
optimizes spectrum resources
Self-transitions from CBRS to LAA based on real-time interference monitoring
Achieves higher peak data rates through carrier aggregation
Patented Smart Antenna System and intelligent scheduling
Dual Band
FW-300i LAA
Easy to deploy and future-proofs non-licensed spectrum holders.
KEY FEATURES:
- All-In-One’ Fully Integrated Solution
- Features Self Channel Assignment
- CBRS Category B Certified
- Supports all LTE TDD Configurations
- Supports Carrier Aggregation
- 60° Azimuth Coverage
- Features Standard 2×2 MIMO Configurations
- Network Management: WebUI, CLI. TR-069 and EMS
Dual Band
FW-600 LAA
Offers high capacity through the use of intelligent beamforming.
THE FW-600 B48/46 DUAL BAND ARCHITECTURE FEATURES:
- Up to 6 Carriers (CC) per unit in DL and 4CC in UL across B48 and B46
- Carriers can be split in multiple configurations across B48 and B46 eg. 3 CC B48 + 3 CC B46 or 4 CC B48 + 2 CC B46
- Carrier aggregation is supported in both contiguous and non-contiguous fashion covering entire band without IBW window restrictions.
eNodeB HIGHLIGHTS:
- Delivers close to 1 Gbps Aggregate Throughput per eNodeB
- CBRS Category B certified
- Supports multiple TDD profiles, including TDD Configs 1-7 & 2-7
- Carrier Aggregation can be accomplished using different simultaneous channel sizes, including across multiple sectors
- Supports modulations of 256 QAM* in Downlink and 64 QAM in Uplink
- When paired with BLiNQ’s dual band multi-beam antenna, provides system capacity of 2.65 Gbps
Dual Band
FWC-133-3550
BLiNQ’s FWC-133-3550 HE Outdoor CPE is a Category 12/13 Outdoor CPE that supports BLiNQ’s FW-300i, FW-600 and X-300i solutions. It has a built-in high gain directional antenna, allowing to expand LTE signal coverage.
KEY FEATURES:
- Supports TDD-LTE Mode Band 42/43/48 & 46 *
- Supports 3GPP Release 12
- Supports up to UE LTE Category 12/13/15 PHY Rate **
- Supports 4×4 MIMO with 40 MHz CA
- Supports DL 256QAM with DL 2×2 MIMO only
- Supports UL 2Tx (CDD / UL_MIMO/ UL_CA)
- Physical 2Tx & 4Rx in RF Front End
- GPS for location (optional HW & SW ; not in default package )
- Supports 1.8V and 3V SIM and USIM Card for LTE Mode
- Supports Dynamic Host Configuration Protocol
- Built-in web server for web-based configuration
- Password protected access and configuration
- Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab (10/100/1000 Mbps )
- Support Power over Ethernet of Outdoor WAN port {802.3 af}
- Supports VPN pass-through
- IP65 Environmental Proof
* B46 supports UNII-1 & 3
** TDD Cat 12/13 with 4×4 + 40MHz carrier aggregation peak throughput is around 440Mbps for Downlink @ TDD Config 2 SSF 7 & UL CA + 64QAM is around 30Mbps for Uplink
** TDD Cat 15 with2x2 + 80MHz carrier aggregation +256QAM peak throughput is 500 Mbps+ for Downlink @ TDD Config 2 SSF 7 & UL CA + 64QAM is around 30Mbps for Uplink
© All rights reserved BLiNQ Networks