FW-600
Band 41
Datasheet
Specifications
FW6-B41-00-WW
| RADIO SPECIFICATION | ||
|---|---|---|
|
Frequency Band |
TDD LTE Bands 41 |
|
|
Max. Transmit Power |
39 dBm/port (+3 dBm MIMO) |
|
|
Channel Bandwidth |
10, 15, 20 MHz |
|
|
MIMO |
6Tx x 6Rx (several possible MIMO configurations) |
|
|
LTE Compliance |
3GPP Release 10 (SW upgrade to Release 13) |
|
| MECHANICAL | ||
|---|---|---|
|
Dimensions (LxWxD) Base Unit |
19.4” x 12” x 8.4” (492 mm x 304 mm x 160 mm) |
|
|
Survival Wind Speed |
Up to 125 mph (200 km/h) |
|
|
Weight |
55.1 lbs (25.0 kg) |
|
|
Bracket Weight |
33.1 lbs (15 kg) – Supports up to 3 x FW-600 units |
|
|
Operational Temperature |
-40°F to 140°F (-40°C to 60°C) |
|
| PERFORMANCE & ATTRIBUTES | ||
|---|---|---|
|
Number of UEs Supported |
Up to 288 UEs per Base Unit |
|
|
Throughput DL TDD Config 2-7 |
110 Mbps (140 Mbps*)per Carrier
330 Mbps (420 Mbps*) per Base Unit - 3 x Carriers |
|
|
Throughput UL TDD Config 2-7 |
11 Mbps per Carrier
33 Mbps per Base Unit - 3 x Carriers |
|
|
Operating Mode |
TD-LTE supports all standard frame configurations |
|
|
Power Consumption |
480 W |
|
|
Power |
48V DC |
|
|
Connectivity |
1 x Copper 1000BaseT 1 x SFP 1 x PPS TNC Connector 6 x 2.2-5 RF Connectors |
|
|
Synchronization |
Integral GPS receiver (GPS, GLONASS, BeiDou) |
|
|
Embedded EPC |
Software Option |
|
* Roadmap Item
| OA&M | ||
|---|---|---|
|
Configuration |
WebUI. CLI and EMS |
|
|
EMS Integration |
RESTCONF |
|
|
OAM Protocols |
RESTCONF, HTTPS, SSH, SNMPv2c |
|
FW6-MBA3F-E3AB ANTENNA SPECIFICATIONS
| ELECTRICAL | ||
|---|---|---|
|
Ports |
6 x High Band ports for 1695-2690 MHz |
|
|
Frequency Range |
2496-2690 MHz |
|
|
Gain |
21.5 dBi |
|
|
Azimuth Beamwidth (-3 dB) |
12.8° |
|
|
Azimuth Beam Crossover |
11.0 dB |
|
|
Elevation Beamwidth (-3 dB) |
9.7° |
|
|
Electrical Downtilt |
5° |
|
|
Elevation Sidelobes (1st Upper)(Typ.) |
< -16 dB |
|
|
Cross-Polar discrimination (at Peak) |
> 35 dB |
|
|
Front-to-Back Ratio @180o (Typ.) |
> 19 dB |
|
|
Cross-Polar Port-to-Port Isolation |
> 24 dB |
|
|
Interbeam Co-Pol Isolataion |
> 15 dB |
|
|
Interbeam Co-Pol Isolation (Non-Adjacent Beams) (Worse Case) |
> 12 dB |
|
|
Voltage Standing Wave Ratio (VSWR) |
< 1.5:1 |
|
|
Passive Intermodulation (2x20W) |
≤ -153 dBc |
|
|
Input Power Continuous Wave (CW) |
200 watts |
|
|
Polarization |
Dual Pol 45° |
|
|
Input Impedance |
50 ohms |
|
|
Lightning Protection |
DC Ground |
|
| MECHANICAL | ||
|---|---|---|
|
Dimensions (LxWxD) |
30.5” x 24.9” x 6.6” (776 mm x 633 mm x 167 mm) |
|
|
Survival Wind Speed |
Up to 150 mph (241 kph) |
|
|
Front Wind Load |
162 lbs (722 N) @ 100 mph (161 kph) |
|
|
Side Wind Load |
46 lbs (206 N) @ 100 mph (161 kph) |
|
|
Equivalent Flat Plate Area |
6.3 ft² (0.6 m²) |
|
|
Weight** |
41.6 lbs (18.9 kg) |
|
|
Connector |
6 x 7-16 DIN female long neck or 4.3-10 female |
|
|
Mounting Pole |
2 in to 5 in (5 cm to 12 cm) |
|
** Weight excludes mounting
© All rights reserved BLiNQ Networks